Fiberer - PM Mechanical Switch (1x4)

Features			Applications
High Extinction Ratio Low Insertion Loss High Channel Isolation Highly Stable and Reliable Epoxy-Free Optical Path			Optical Signal Routing Network Test Systems Instrumentation

Fiberer PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.

Performance Specifications

Parameter	Specification
Operating Wavelength (nm)	1310, 1550
Insertion Loss (dB)	<1.1
Wavelength Dependent Loss (dB)	<0.2
Extinction Ratio (dB)	>18 (typ.20)
Channel Cross Talk (dB)	>55
Repeatability (dB)	��0.02
Return Loss (dB)	>50
Switching Speed (ms)	<10 (typ.5)
Drive Voltage (V)	5
Power Handling (mW)	500
Durability (cycles)	10 million
Operating Temperature (��C)	0 ~ +70
Storage Temperature (��C)	-40 ~ +85
Fiber Type	Panda PM fiber
Dimensions (LxWxH) (mm)	26x33x10.5

Electric Configuration

Relay Status	Electric Drive (Pin #)				Sensor Status (Pin #)
Relay Status	1	5	6	10	2-3	3-4	8-7	8-9
0 (Reset)	GND	GND	GND	+	Close	Open	Open	Close
1 (set)	+	GND	GND	GND	Open	Close	Close	Open

Specifications may change without notice.

Dimensions (mm)

Dimmension of Mechanical Switch 1X2

Ordering Information

PMS

Option

Operating Wavelength

Port

Grade

Pigtail Style

Fiber Length

In/Out Connector

L= Latching

15=1550nm

13=1310nm

0104=1x4

P=P Grade

1= Bare Fiber

2=900um Jacket

1=1m

2=2m

0=None
1=FC/APC
2=FC/PC
3=SC/APC
4=SC/PC
5=ST
6=LC