Service
Contact
Email: sales@fiberer.com
Wechat:
Tel: +86-755-8619-2858
+86-755-8621-1558
2x2 PM Switch
Specification
Features Applications
Unmatched Low Cost
Low Insertion Loss
High Channel Isolation
Highly Stable and Reliable
Epoxy-Free Optical Path
Latching or Non-Latching
Optical Signal Routing
Network Test Systems
Instrumentation
Fiberer PM Mechanical Switch(1x2 PM Switch,2x2 PM Switch) connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.
Performance Specifications
Parameter Specification
Operating Wavelength (nm)
1310±40
1550±40
Insertion Loss (dB)
0.8(Typ.), 1.2(Max.)
Wavelength Dependent Loss (WDL) (dB)
< 0.20
Extinction Ratio (dB)
> 18 (typ 20)
Repeatibility(dB)
±0.02
Channel Cross Talk (dB)
> 60
Return Loss (dB)
> 55
Switching Speed (ms)
< 10
Operating Voltage (V)
4.5 ~ 5.5
Power Handling (mW)
500
Durability (cycles)
10 Million (Min.)
Operating Temperature (°C )
0 ~ +70
Fiber Type
Panda PM fiber
Dimensions (LxWxH) (mm)
29x15x10
Electrical Pin Configuration:
Optical Path
Port1~ Port3 and Port2 ~ Port4
Port1~ Port4 and Port ~ Port3
Electric Drive
Non-Latching
Pin1
Pin10
Latching
Pin10
Pin6
Pin1
Pin5
V+
GND
V+
GND
Sensor Status
Non Latching and Latching
Pin2-3, Pin8-9 Close
Pin2-3, Pin8-9 Open
Pin3-4, Pin7-8 Open
Pin3-4, Pin7-8 Close
Specifications may change without notice
Dimensions
Ordering Information
PMS
Option
Operating Wavelength
Port
Grade
Pigtail Style
Fiber Length
In/Out Connector
L= Latching
N=Non- Latching
15=1510~1610nm
0202=2x2
P=P Grade
1=Bare Fiber
1=1m
0=None
** If you are agent
/ OEM / middle trade, please copy the specification
into word document from our website ,then send it
to your clients.
Loading...
Service
Contact
josieHe501
:
